Lighting

Boasting 4200 lumens and 6 CREE LEDs at 6000k; the Pro 4200 Enduro offers 4 brightness settings and a daylight flash mode that are factory-tuned to optimize riding in any condition. And, a long-lasting 8-cell battery that doubles as a USB portable charger makes this lighting system perfect for long night rides, high speed MTB descents, or backcountry touring. - Ultra bright 4200 lumen output - 8 Cell Li-Ion battery, doubles as a USB portable charger - Remote switch for ease of operation - The preferred light for serious MTB riders - Highly durable light housing with Dupont Fiberglass reinforced nylon - Perfect for handlebar mounting - FL 1 Standard IP64, dust and water-resistant - 4 steady light modes and 1 daylight flash - Custom 3 cone dual-beam reflectors utilizing 6 CREE LEDs at 6000k - Convenient nylon storage pouch Warranty: - The Pro 4200 Enduro Remote is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. System Includes: - LED Headlamp with Remote Switch - Li-Ion Battery/USB Portable Charger - Handlebar Mount - Fits up to 35mm - AC Adapter - Nylon Storage Pouch

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2500 - Battery: Li-Ion - Recharge Type: USB

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 1500 - Battery: Li-Ion - Recharge Type: USB

The All New NiteRider Lumina Dual 1800 represents the next evolution of our best-selling Lumina headlight into a dual LED set-up that produces a far-reaching beam pattern with extensive peripheral illumination; making it the ideal choice for any riding situation or terrain. The Dual emits an amazing 1800 lumens while in Boost Mode, making it one of the brightest self-contained bicycle lights available today. Simply double tap the power button to set the light to Boost Mode. When in Boost Mode, the power button will illuminate red and blue to notify the user at a glance. The Dual is also equipped with side lighting to increase your visibility day or night. Tested, meeting an IP64 rating; The Dual 1800 is designed to be used in a variety of riding conditions because of its high resistance to water and dust. Its high-strength Dupont Fiberglass reinforced nylon body casing and aluminum heat sink are engineered for extreme resistance to cracking and abrasion. - All New Collimator Lens, distributes a smooth widespread beam pattern - Side lighting for increased visibility day or night - Long lasting 20 hour runtime at 100 lumens in Walk Mode - 5 Light Levels plus 2 Daylight Flash Modes - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Helmet mountable (Helmet Mount sold separately) - Fast 3 hour charge via the included AC power charging adapter - Low battery indicator - Extend your ride time, 6 hour runtime at 350 lumens in Low Mode - Boost Mode indicator, power button will light up red and blue - Boost Mode, double tap power button to unleash maximum LED output at 1800 lumens! - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Dual 1800 is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - Dual LED Head Light - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - AC Power Charging Adapter

SMARTER VISION Aside from outstanding lumen capacity and industry-leading usage time, the Recon HL1800 monitors ambient light to change output accordingly, helping to save battery power for when you need it. Shines brighter, runs longer and works smarter. FEATURES - Smart Mode light sensor monitors ambient light to adjust light output accordingly - The Recon 1800 can pair with ANT+ compatible computers to view battery information on the computer screen.* - ANSI certified lumens and run time - Focused optics with side light design for over 270-degrees of visibility - Heat-dissipating CNC-machined aluminum casing - Power status indicator alerts remaining run-time before powering off - Includes adjustable GoPro mount - *Giant recommends operating the HL1800 in manual mode when using Garmin computers. SPECIFICATIONS - Size: 103x32x47mm - Weight: 190g without mount - Colors: Black - Output: 1800 lumens - Runtime: High (1800LM) 1.5hrs, Middle 3.5hrs (900LM), Low 7hrs (450LM), Smart (100LM>450LM with flash output in Day) 40hrs; (900LM with steady output at Night) 3.5hrs, Flash (100LM) 65hrs - Battery: Li-Ion polymer battery (6400mAh) - Water resistance: IPX6 - Certifications: ANSI-Standard FL-1

The NiteRider Lumina OLED 1200 Boost is an innovative bike light that removes the guesswork related to battery life, allowing you to plan your next ride safely with complete confidence, day or night. The OLED multifunctional digital display screen delivers precise battery run times as a percentage and actual time for the Lumina OLED's 9 lighting levels. The Lumina OLED 1200 Boost features a custom engineered collimator sense, producing a generous widespread beam pattern. With Boost Mode providing a stunning 1200 lumens of maximum light output, this makes the Lumina OLED highly capable for use when navigating through diverse riding conditions. - New Collimator Lens, distributes a generous even widespread beam - Boost Mode! Unleash maximum LED output - 5 Light Levels plus 4 Daylight Flash Modes - CREE LED at 6000k - Multifunctional OLED screen provides detailed operational information - FL1 Standard IP64, water resistant - Intellicharge – Reduce charge time in half! - Backlit buttons for easy to use interface in any lighting condition - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Convenient USB rechargeable WARRANTY - The Lumina OLED 1200 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head with OLED Display - Internal Li-Ion Battery - Handlebar Mount fit up to 35mm - USB Charging Cable

Featuring our brightest front and rear lights, this is the one-two combo to help keep you seen day or night! WE'VE GOT YOU COVERED WITH THESE CHAMPS. Meet the one-two combo that keeps you seen day and night! Featuring our brightest front and rear lights, the Dayblazer 1500 front and Dayblazer 65 rear light set features eye-catching BLITZ Daytime Running Mode and all the mounting versatility you could ever need. Bright enough to help keep you seen during the day, and also great for hitting the streets at night. - Recharge Type: Micro-USB rechargeable — Charges via any standard USB port (charging cable included) - Brightness: Up to 1,500 lumens front, 65 lumens rear - Country of Origin: China - Recharge Time: 5-hour recharge (front)/2-hour recharge (rear) - Mounting Options: Universal Mount - Action-camera-style mount fits most helmets and handlebars 22–35mm in diameter (front)/Versatile mounting system (rear) - Weight: 188 grams (front 140g, rear 48g) Run Time : - Blitz mode (front): 2 hours at 1,500 lumens - High mode (front): 3 hours at 750 lumens - Low mode (front): 6 hours at 400 lumens - Pulse mode (front): 10 hours at 270 lumens - Strobe mode (front): 15 hours at 120 lumens - Solid mode (rear): 1.6 hours at 50 lumens - High flash/Strobe mode (rear): 3 hours at 65 lumens - Low mode (rear): 6 hours at 35 lumens - Group Ride mode (rear): 20-25 hours at 3 lumens Water Resistance: - IP-67 submersible - Ingress protection rating, or "IP Rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-67 Standard, which means it is totally protected against dust/grit and fully protected against the effects of immersion between 15cm and 1 meter for 30 minutes.

The NiteRider Lumina 1200 Boost provides enough light that it can be used in just about all riding conditions, whether it be on the road, on your favorite mountain biking trail, or hand-held in Walk Mode. Specifically designed to meet the needs of riders in all cycling categories, the Lumina 1200 Boost features the Boost Mode light setting. Simply double click the power button, giving you the option to operate your light at maximum light output! And utilizing a CREE LED at 6000k, means you'll get what most consider to be the best LEDs available on the market today. These high performance LEDs are extremely reliable, with no filament to break or burn out. With the all new custom engineered collimator optics, the Lumina 1200 Boost projects a beam pattern that provides a generous widespread and even beam pattern of 1200 brilliant lumens! The high-strength head light body casing is comprised of lightweight aluminum and Dupont Fiberglass reinforced nylon that is highly durable. - All New Collimator Lens, distributes a generous even widespread beam pattern - Boost Mode, double tap power button to unleash maximum LED output at 1200 lumens! - 5 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Perfect for helmet mounting (Helmet Mount sold separately) - IntelliCharge – Reduce charge time in half! - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY -The Lumina 1200 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable

SMARTER VISION Aside from outstanding lumen capacity and industry-leading usage time, the Recon HL1100 monitors ambient light to change output accordingly, helping to save battery power for when you need it. Shine brighter, run longer and work smarter. FEATURES - Smart Mode light sensor monitors ambient light to adjust light output accordingly - ANSI certified lumens and run time - Focused optics with side light design for over 270-degrees of visibility - Heat-dissipating CNC-machined aluminum casing - Power status indicator alerts remaining run-time before powering off - Includes adjustable GoPro mount SPECIFICATIONS - Size: 103x30x29 mm - Weight: 107g without mount - Colors: Black - Output: 1100 lumens - Runtime: High (1100LM) 1.5hrs, Middle 3.5hrs (500LM), Low 7hrs (275LM), Smart (100LM>275 LM with flash output in Day) 36hrs; (500LM with steady output at Night) 3.5hrs, Flash (100 LM) 33hrs - Battery: Li-Ion polymer battery (3500mAh) - Water resistance: IPX6 - Certifications: ANSI-Standard FL-1

The NiteRider Lumina 1000 Boost is the perfect light for mountain bikers, road riders, adventure riders and urban commuters. Featuring a tried and true handlebar mount (fits up to 35mm) that is sure to remain rock solid whether on the trail or pavement. Double clicking the power button activates Boost Mode, giving you the option to operate your light at 1000 lumens maximum light output! This self-contained light makes use of the IntelliCharge function, which charges the battery twice as fast as the normal charge rate when connected to a higher amp AC adapter. With the new NiteRider custom engineered collimator lens, the Lumina 1000 Boost projects a wide and even beam pattern of 1000 lumens! - All New Collimator Lens, produces a generous even widespread beam - Boost Mode, double click power button to unleash maximum LED output - 5 Light Levels plus 2 Daylight Flash Modes - CREE LED at 6000k - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Perfect for helmet mounting (Helmet Mount sold separately) - IntelliCharge – Reduce charge time in half! - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY The Lumina 1000 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable

Want to hit the local trail for a midnight shred, or commute home on a November evening? The sleek and tiny Dayblazer 1500 has you covered. MEET THE NEW CHAMP! This little devil packs a 1500-lumen punch onto a tiny bar perch. Weighing in at just 140 grams, this light hits way above its weight class. Gone are the days of a 10-watt halogen bulb and a bulky water-bottle-shaped, lead acid battery pack. Now we've got it all wound up in a tiny bar-mounted front light! Want to hit the local trail for a midnight shred, or commute home on a November evening? The sleek and tiny Dayblazer 1500 has you covered. Featuring our eye-popping BLITZ Daytime Running Mode to grab the attention of cars, an action-style camera mount, ample side visibility and IP-67 submersibility, the Dayblazer 1500 is your new best riding buddy. - Recharge Type: Micro-USB rechargeable — Charges via any standard USB port (charging cable included) - Brightness: Up to 1,500 lumens - Country of Origin: China - Recharge Time: 5-hour recharge - Mounting Options: Universal Mount - Action-camera-style mount fits most helmets and handlebars 22–35mm in diameter - Weight: 140 grams Run Time: - Blitz mode: 2 hour at 1,500 lumens - High mode: 3 hours at 750 lumens - Low mode: 6 hours and 400 lumens - Pulse mode: 10 hours at 270 lumens - Strobe mode: 15 hours at 120 lumens Water Resistance: - IP-67 submersible - Ingress protection rating, or "IP Rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-67 Standard, which means it is totally protected against dust/grit and fully protected against the effects of immersion between 15cm and 1 meter for 30 minutes.

- Reliable and high quality LED Lamps and strips from leading manufacturer CREE - Total internal reflection (TIR) lenses draw LED light into efficient, well-controlled beams that maximize the usable lumens in the target area without glare - Precisely milled CNC 6061 Aluminum Housing for durability as well as fast heat dissipation - IPX6 waterproof rating - Different from traditional lithium battery bike lights, RECON-E lights are designed to plug into and work with most major - E-bike motor systems - Handle bar remote switch for on the fly control - Three mounting options - ANSI Certified

- Reliable and high quality LED Lamps and strips from leading manufacturer CREE - Total internal reflection (TIR) lenses draw LED light into efficient, well-controlled beams that maximize the usable lumens in the target area without glare - Precisely milled CNC 6061 Aluminum Housing for durability as well as fast heat dissipation - IPX6 waterproof rating - Different from traditional lithium battery bike lights, RECON-E lights are designed to plug into and work with most major - E-bike motor systems - Handle bar remote switch for on the fly control - Three mounting options - ANSI Certified

The Blinder Road 600 features all the best attributes of our original Blinder Road, but now with an incredible 600 lumens of light output. When this increase of illumination power is combined with the carefully considered beam angles for road riding, you have Knog’s most powerfully perfect road bike light ever. Advanced LED's & Optics There is no such thing as a universal bike-light. End-use and even bike type dictate the best bike light to use. Blinder Road utilizes two LEDs, each independently capable of 400lm of output or 600lm when used together. The LHS optic has a 12-degree beam providing a spotlight that is perfect for racing and fast riding on smooth roads, while the RHS Optic has a 32-degree beam proving a flood light which is best suited for use on slower rides on bumpy or uneven riding conditions. Each LED has a variety of flash patterns and functions independent of the other. Unique Fastening System Utilizing silicone to create the elastomeric strap combined with an over-molded polycarbonate clip system allows Blinder Road to adapt to the many various configurations required of today's road cyclists, many of whom have GPS systems on their bikes. The Blinder Road is stylish and versatile enough to fit with a multitude of today's high-end bicycle cockpits (includes two removable silicone straps for bars 22-28mm & 29-35mm). Waterproof & Integrated USB Charging The Blinder road is 100% waterproof with a rating of IP67, which means you submerge your light in depths greater than 1 meter for over 30 minutes without damage (note if you are under 1 meter of water on your bike, the waterproofing of your light is probably the least of your worries). The light is charged via integrated USB, which means it does not require additional cables to charge from a USB Port, and there's no need for single-use batteries. Intuitive Functionality When your Blinder is running low on battery, a red led will light up next to the button. This ring will turn green and then turn off once the Blinder is fully charged and ready to go. With a design that is wider rather than longer, accommodating the 2 optics side by side keeps the center of gravity as close to the handlebar as possible which avoids the potential for movement on bumpy roads. Finally, the Blinder Road's buttons and strap closures are all at the perfect ergonomic angle and are long enough to be used while wearing gloves. - Dimensions: H: 73mm x W: 30mm x L: 53mm - Weight: 95g - Lumens: 600

High-performance e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultrahigh-output LEDs deliver up to 1,000 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 - 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes a Direct X-Lock and aluminum CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. *Direct X-Lock Mounting System not compatible with all stems. Please see installation manual for stem compatibility. Specs - Max Lumens: 1000 - Dimensions: 44.5 x 41 x 31mm / 1.75 x 1.61 x 1.22"

Lezyne Power STVZO Pro Headlight. German StVZO optimized lens with approved flood and long-range beam. High performance always-on LED delivers 310 lumens (115 Lux). Durable, heat-dissipating CNC machined aluminum construction. Auto day/night system extends battery runtime. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes X-Lock stem mount and CNC-machined aluminum fork mount. 130cm power cable included.

NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. Lumina Max headlight and NiteLink Remote sold separately. - Maximum 300-lumen output - Run time: 6:00—36:00hrs - Charge time: 2:15hrs - Group Ride Mode: Be seen without distracting fellow cyclists - 2 light levels, 3 flash modes - FL1 Standard IP64 Water Resistant - 79g Includes: - Daylight visible tail light, easy on/off seatpost strap mount, and USB charging cable

USL-605 E-Lume 605:Serfas E-Lume USL-605 Headlight/Cosmo 30 UTL-30 Tail Light USL-605 E-Lume 605: - Daytime Flash Mode - Up To 80 Hrs Runtime - Extruded Aluminum Body - Integrated USB Rechargeable Li-Ion Battery - Backlit Button Indicates Charge Status and Low Battery - Handlebar Bracket UTL-30 Cosmo 30: - High Visibility Lens - IPX6 Water Resistance - Charges To Full In 2 Hours From Empty - Last Mode Memory

Rugged looks with impressive light output and smart features, our all-new completely redesigned Serfas True Series MTB headlights will illuminate your path. The Serfas True 600 MTB features 500 lumens of crystal clear bright nighttime illumination to make out every turn of the trail and 600 lumens in Flash mode to make sure all eyes are on you. A smart grippy extra-large power button with LED-backlit battery-level indicator ensures surefire operation and convenient battery monitoring so there are no unwelcome surprises on the trail. Go-Pro, Helmet, and Bar Bracket Included. - 600 Lumen Output - Extra-Large Grippy Power Button - Backlit LED Battery Level Indicator - USB-C Charging Port w/1A Fast Charging - Last Mode Memory (In Solid Mode) - Go-Pro and Bar Bracket Included - Removable Li-Ion Battery - Convenient Magnetic Battery Removal - No-Tools-Required Installation - IPX6 Water Resistance Rating - Weight: 128 Grams w/Bracket - Battery: 1-Cell Li-Ion, 2600 mAh - Charge Time: 3 hrs (Using 1A USB Wall Charger) Solid Mode: - High 600 Lumens—2.5 hrs - Medium 250 Lumens—4.5 hrs - Low 130 Lumens—10 hrs Flash Mode: - Daytime Flash 600 Lumens—40 hrs - Low 80 Lumens—50 hrs

X3 Front Light: - Double-lens technology provides HIGH-QUALITY precise light distribution - LED STRIP shows battery level - Side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - 30 LUX - 5 Modes - Run time on Eco = 24 hrs - Run time on High Steady = 4 hrs XR Rear Light: - Light guide for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Compact size - Bracket with flexible mounting option - .06 LUX - 5 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 20 hrs

Blazing on a budget is how we should describe this light set. Featuring the Dayblazer 550 front light and the Dayblazer 65 rear light, this combo will get you noticed without breaking the bank. THE PERFECT COMMUTER LIGHT SET. Get noticed without breaking the bank. Both lights are spec'd with eye-catching BLITZ Daytime Running Mode and a multitude of mounting options. Perfect for city riding. - Recharge Type: Micro-USB rechargeable — Charges via any standard USB port (charging cable included) - Brightness: Up to 550 lumens front, 65 lumens rear - Country of Origin: China - Recharge Time: 3-hour recharge (front)/2-hour recharge (rear) - Mounting Options: Universal Mount - Action-camera-style mount fits most helmets and handlebars 22–35mm in diameter (front)/Versatile mounting system (rear) - Weight: 177 grams (front 129g, rear 48g) Run Time : - Blitz mode (front): 1 hour at 550 lumens - High mode (front): 1.5 hours at 275 lumens - Low mode (front): 5 hours at 75 lumens - Pulse mode (front): 5.5 hours at 100 lumens - Strobe mode (front): 12 hours at 65 lumens - Solid mode (rear): 1 hour at 50 lumens - High flash/Strobe mode (rear): 3 hours at 65 lumens - Low flash/Strobe mode (rear): 6 hours at 35 lumens - Group Ride mode (rear): 20-25 hours at 3 lumens Water Resistance: - IP-67 submersible - Ingress protection rating, or "IP Rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-67 Standard, which means it is totally protected against dust/grit and fully protected against the effects of immersion between 15cm and 1 meter for 30 minutes.

The Lezyne STVZO Pro E115 Headlight has a German StVZO optimized lens with approved flood and long-range beam. High performance always-on LED delivers 310 lumens. Durable, heat-dissipating CNC machined aluminum construction. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. - Direct X-Lock and CNC aluminum fork mount - Includes 140cm long power cable

Mid Cobber produces an incredible 330º of light, so you'll be clearly seen from all angles. In an increasingly busy world, this bike light is brilliantly effective at attracting attention and helping keep you safe on the road. Packing 170 lumens this Mid Cobber is seriously bright. The Cobber has integrated USB recharging, is 100% waterproof and you can program the settings using the Modemaker app. It mounts with tool-less removable silicone straps for bars/seat posts 22 – 32mm+ diameter with magnetic mount (aero Mount also included). If you are looking for the best rear commuter bike light around, look no further. - Light modes: Max, Mid, Steady Pulse, Flash, Rolling Flash, Side Flash, Disco Flash, Eco Flash come pre-programmed - LEDs: Efficient Chip on Board (COB) LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode - Charge time: 4 hours (LED will turn off when fully charged) - Battery: USB Rechargeable Lithium Polymer - Accessories included: Standard Mount, Aero Mount, 3x interchangeable straps for bars/seat posts 22-27mm / 28-32mm+, and USB extension - Dimensions: 62 x 33mm - Weight: 44g

Want to hit the local trail for a midnight shred, or commute home on a November evening? The sleek and tiny Dayblazer 1000 has you covered. MEET THE NEW CHAMP! This little devil packs a 1000-lumen punch onto a tiny bar perch. Weighing in at just 140 grams, this light hits way above its weight class. Gone are the days of a 10-watt halogen bulb and a bulky water-bottle-shaped, lead acid battery pack. Now we've got it all wound up in a tiny bar-mounted front light! Want to hit the local trail for a midnight shred, or commute home on a November evening? The sleek and tiny Dayblazer 1000 has you covered. Featuring our eye-popping BLITZ Daytime Running Mode to grab the attention of cars, an action-style camera mount, ample side visibility and IP-67 submersibility, the Dayblazer 1000 is your new best riding buddy. - Recharge Type: Micro-USB rechargeable — Charges via any standard USB port (charging cable included) - Brightness: Up to 1,000 lumens - Country of Origin: China - Recharge Time: 5-hour recharge - Mounting Options: Universal Mount - Action-camera-style mount fits most helmets and handlebars 22–35mm in diameter - Weight: 140 grams Run Time : - Blitz mode: 1.5 hours at 1,000 lumens - High mode: 3 hours at 500 lumens - Low mode: 5.5 hours and 350 lumens - Pulse mode: 6.5 hours at 210 lumens - Strobe mode: 15 hours at 100 lumens Water Resistance: - IP-67 submersible - Ingress protection rating, or "IP Rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-67 Standard, which means it is totally protected against dust/grit and fully protected against the effects of immersion between 15cm and 1 meter for 30 minutes.

“Blazing On A Budget" is how Blackburn should describe this light. Featuring 800 lumens of perfectly-focused night time illumination, their eye popping BLITZ mode to grab the attention of cars, a Go Pro Mount, IP-67 submersibility, and ample side visibility. The DAYBLAZER 800 is going to get you noticed without breaking the bank. - No tools required - Lithium-ion battery - Waterproof to IP-67 standard - 4 hour recharge time - TIR lenses - Separate action camera mount included - LED Charge Indicator - Runtime: BLITZ 1.5hrs (800 lumen), Medium 3hrs (500 lumen), Low 5 hrs (300 lumen) - Runtime Pulse/Strobe: 8hrs (200 lumen)/12 hrs (200 lumen) - 129g

The Blinder Road 400 features all the best attributes of our original Blinder Road, but now with a powerful 400 lumens of light output. When this increase of illumination power is combined with the carefully considered beam angles for road riding, you have Knog's most powerfully perfect road bike light ever. Advanced LED's & Optics There is no such thing as a universal bike light. End-use and even bike type can dictate the best bike light to use. Blinder Road's two LEDs are each independently capable of 250lm of output or 400lm when used together. The LHS optic has a 12-degree beam providing a spotlight that is perfect for racing and fast riding on smooth roads, while the RHS Optic has a 32-degree beam proving a floodlight which is best suited for use on slower rides on bumpy or uneven riding conditions. Each LED has a variety of flash patterns and functions independent of the other. Unique Fastening System Utilizing silicone to create the elastomeric strap combined with an over-molded polycarbonate clip system allows Blinder Road to adapt to the many various configurations required of today's road cyclists, many of whom have GPS systems on their bikes. The Blinder Road is stylish and versatile enough to fit with a multitude of today's high-end bicycle cockpits (includes two removable silicone straps for bars 22-28mm & 29-35mm). Waterproof & Integrated USB Charging The Blinder road is 100% waterproof with a rating of IP67, which means you submerge your light in depths greater than 1 meter for over 30 minutes without damage (note if you are under 1 meter of water on your bike, the waterproofing of your light is probably the least of your worries). The light is charged via integrated USB, which means it does not require additional cables to charge from a USB Port, and there's no need for single-use batteries. Intuitive Functionality When your Blinder is running low on battery, a red led will light up next to the button. This ring will turn green and then turn off once the Blinder is fully charged and ready to go. With a design that is wider rather than longer, accommodating the 2 optics side by side keeps the center of gravity as close to the handlebar as possible which avoids the potential for movement on bumpy roads. Finally, the Blinder Road's buttons and strap closures are all at the perfect ergonomic angle and are long enough to be used while wearing gloves. - Dimensions: H: 63mm x W: 30mm x L: 53mm - Weight: 70g - Lumens: 400

The Garmin XL Combo mount by K-Edge is the next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer and GoPro compatible cameras & lights, specifically designed to accommodate the EDGE 1030, 1000, 810 and 800, also compatible with the smaller Edge models like 520, 510, 500, in addition to the Forerunner and Touring models. The K-Edge advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that our replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. K-EDGE provides free replacement inserts, as needed. Compatibility - All Lumina Series lights equipped with K-Edge GoPro Adapter (sold separately). - Supported Computers: Garmin Edge 1030, 1000, 810, 800. Also compatible with new Garmin Edge 520, Edge 20 and Edge 25 models, in addition to Forerunner and Touring models. - Camera Interface: GoPro style interface for compatible action cameras or lights - Includes Garmin Pro XL Combo Mount and mounting hardware - CNC Machined 6061 T6 Aluminum - Fits 31.8mm handlebars - New clamp design is hinged for ease of installation - Weight: 64g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects (damages due to abuse or crashing excluded) - Note: Assembly bolts not meant to be removed or tampered with at any time.

The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility. - The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - All in one, Laser and tail light! - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light w/ Laser Lanes - Seat post Mount - USB Cable

The Recon HL500 is the perfect multi-function light for use on handlebars or helmets. It features abundant light output in a lightweight design. - Lumens and runtime certified to the ANSI-Standard - Focused optics with side light design for over 270 degrees visibility - Heat-dissipating CNC-machined aluminum structure - Power status indicator can let you know how much run-time to go before powering off - Includes adjustable GoPro mount SPECIFICATIONS - Sizes: 85x26x34mm - Weight: 81g without mount - Colors: Black; Gray; Blue; Red - Output: 500 lumens - Runtime: High (500LM) 2hrs, Middle 4hrs (300LM), Low 10hrs (100LM), Flash 100hrs, SOS: 100hrs - Battery: Li-Ion polymer battery (2000mAh) - Waterproof: IPX6 - Certifications: ANSI-Standard FL-1

Our Brightest Tail Light Yet! Enhanced Side Visibility Design. 350 Lumens / 2 Solid & 3 Flash Modes. USB C Rechargeable. Unique Fin Lens Design Provides Enhanced Long Distance Visibility While Creating Generous 180 Degree Attention-Grabbing Side Illumination Features: - 350 Lumens (Daytime Flash) - Three Super Bright CREE LEDs - Finned Lens Design Provides 180 Degree Visibility - LED Charge Indicator - Auto Safe Mode* - Daytime Flash Mode - Up To 20 Hours Runtime - USB C Rechargeable - Aero Post Compatible Bracket Solid Modes: - High (140 Lumens): 1 hr 30 mins - Low (15 Lumens): 6 hrs Flash Modes: - Daytime Flash (350 Lumens): 19 hrs - High Flash (200 Lumens): 9 hrs - Low Flash (50 Lumens): 20 hrs - Auto Safe Mode Extends Runtime Additional 45 mins - Weight: 52 Grams w/ Bracket - Battery: 1050 mAh Lithium Polymer